30
June

Midwest PX Billet Lower and Lower Build Kit Deals

Our friends at Midwest PX have a special deal going on for their house brand, Gen 2 billet lower.  The lowers by themselves are only $99.95 each which is a pretty killer deal on its own.  But they’re also bundling the lower with a their LTG (less trigger group) LPK, ALG Defense ACT trigger and hammer, and choice of a six position milspec receiver extension kit or an A2 extension kit for just $199.95. All you need to do is add a stock and you’ve got a really nice complete lower for the money. If you’re putting together a new build this is definitely something I would recommend looking into. Check out the links and information below.

620 Midwest PX Billet Lower and Build Kit Deal 
Link to the lower: http://midwestpx.com/product_info.php?products_id=851
Link to the bundle: http://midwestpx.com/product_info.php?products_id=852

Some info on the lowers:

Our premium billet receiver is manufactured for us by a contract machine shop in the US. All operations are performed under one roof to ensure a quality product prior to being sent out for milspec plating. These receiver are made of 7075 billet aluminum which is significantly stronger than 6061. We have a number of extras and upgrades built into this lower such as the threaded bolt catch pin, threaded takedown detent hole, and upper/lower tensioning screw. All hardware to take advantage of these features are provided with each lower at no additional charge. We also opted for a subdued rollmark for a cleaner, more aesthetically-pleasing look.

As with all Midwest PX branded parts, this lower carries a lifetime warranty against defects in materials and workmanship.

*Manufactured from a solid billet aircraft-grade 7075-T6 aluminum
*Matches forged uppers
*Broached magazine well with drop free design and beveled bottom lip
*Flared magazine well to assist in faster/easier reloads
*CNC deep rotary engraved to exceed ATF depth requirements
*MIL-A-8625 Type III Hard Anodizing (Deep Black)
*Captured take down pin spring/detent (includes hardware, Rear takedown pin spring may need to be trimmed 1/8-1/4″ if set screw is used to give proper tension on pin)
*Upper/lower tensioning screw (includes hardware)
*Threaded bolt catch pin hole (includes hardware)
*Integrated enhanced trigger guard
*Low Shelf design to make full auto conversions for LE, MIL or post sample machine guns easier (RDIAS/RLL)
*Continuous threading through receiver extension hole and pistol grip screw hole
*Compatible with all lower parts kits, milspec and commercial receiver extensions, and most aftermarket parts.
*The Tactical Link AR-15 Enhanced Battery Assist Lever WILL work with the Gen2 PX-15
* Magpul BAD lever will function properly on the Gen2 PX-15