Category Archives: AR Pistol Parts

The other day, everyone’s favorite deadbeat Dad (the ATF 😜) decided to change their mind and finally give all of us AR Pistol owners permission to shoulder our SB15 Sig Brace again …. as if any of use were asking for permission in the first place. This came after representatives for SB Tactical, the designers of the SB15 Brace, requested sent a letter to the BATFE asking for them to reconsider. You can read all about that specific change here. This change brought up a lot of confusion as to whether or not it also applied to the many other “Pistol Braces” on the market from other companies such as my personal favorite, the Shockwave Technologies Blade. I’m happy to say that the ATF says it does apply to other braces too. Read below!

KAK Shockwave Blade on AERO Precision Pistol

Our friends at Shockwave contacted the ATF themselves to get clarification on whether or not the recent reversal also applied to their Blade Pistol Stabilizer and here is what they found out…

I just got off the phone with a very nice gentleman at ATF Tech Branch—who was fielding these calls today. (He was, understandably, very well versed on the subject—and very nice about it even though he’s been on the phone all day, repeating himself ad nauseam.) I identified myself and asked him specifically if the letter that’s making the rounds is limited to one company’s products–or if it applies to all pistol stabilizing braces. He said: “The letter covers all pistol stabilizing braces, including the Shockwave Blade.” So that settles that.

He then gave me a bit of further guidance for our customers:

  1. By “permanent affixing,” ATF considers that to be adding permanent Loctite to the large set screw that secures the Blade into the dimples in the KAK tube. As long as you don’t red Loctite the set screw in place, ATF considers it to be “temporarily placed” and “perfectly okay to shoulder.” (He didn’t beat around the bush on this topic.)
  2. “Length of pull”—for lack of a better word regarding pistol braces—begins to enter a “gray area” above 13.5″. Above 13.5″ begins “to enter shoulder stock area.” (His words. I believe this has to do with the “comfortableness” aspect.) On an AR-15, the “length of pull” for the Blade is approximately 13.13″, so no issues there. But if you use the Blade on a firearm that requires a large adapter of some sort, please make sure that you only use the dimples up to the point that you remain below the 13.5″ length. Stay below 13.5″ and according to ATF, it’s okay to shoulder a Shockwave Blade.

This information was posted on the Shockwave Technologies website.  You can read it for yourself HERE. While this is just relaying information from one source based on a phone call they had with the ATF, I do know the source and trust that this information is correct. From what I’ve heard, the ATF will be issuing a letter clarifying that this covers all Pistol Braces and not just the SB-15.

If all this AR Pistol talk has got you itching to build another one, check out the KAK Industry SHOCKWAVE kits. They are pretty much exclusively what I use when building an AR Pistol and can’t speak highly enough of them.

Battle Arms Development recently introduced their new Ultra Compact Pistol Sabertube + Vert Buffer System combo which is the latest addition to their Sabertube line up. Basically what you have here is the Buffer System from BAD’s VERT PDW stock but this version is for an AR Pistol. Anymore everyone has a super short AR Pistol and at just 4.75″ long, the Ultra Compact Pistol Sabertube + Vert Buffer System seems like the perfect buffer system for those pistol builds. 

Battle Arms Ultra Compact Pistol Saber Tube VERT Buffe1

Battle Arms Ultra Compact Pistol Saber Tube VERT Buffe1

Battle Arms Ultra Compact Pistol Saber Tube VERT Buffe1

Contrary to popular belief, not everyone has to shoulder their AR Pistols. 😉 I’m picturing this being an awesome setup to run with a single point sling similar to how an MP5K is fired while putting forward pressure on the sling to stabilize the firearm. The Ultra Compact Pistol Sabertube + Vert Buffer System comes complete with the 4.75″ Saber Tube, Buffer Spring and VERT buffer and is now available at www.BattleArmsDevelopment.com.

Maxim Defense, makers of the popular CQB Stock, has just announced that the CQB Pistol PDW Brace model is now available for pre-order. Maxim Defense partnered up with SB Tactical (originators of the SB-15 arm brace) to create an arm brace that is attached to the adjustable length system of the CQB Stock. This allows you to adjust the brace to the best length for each individual user and it also lets you collapse the brace to a super compact size for easier transport. If you are planning to use this product while waiting for your SBR tax stamp to come in you’ll actually be able to keep the main housing and simply swap out the brace portion for the stock portion. 

maxim-defense-cqb-pistol-brace

maxim-defense-cqb-pistol-bracemaxim-defense-cqb-pistol-brace

Pre-Orders are open now for the Maxim Defense CQB Pistol PDW Brace which ranges in price from $395 – $495. According to Maxim Defense these will ship around November 28, 2016.

Order now at www.maximdefense.com


This article was written by Mark B Wentzel

The Labor Day Sales are starting to come through so keep an eye on this thread. First up is KAK Industry. KAK offers very nice components at an affordable price. I used their Shockwave Pistol Buffer Tube, Blade stabilizer and 10.5″ barrel on the build below. Their sale is for 10% off all instock items. Just use the code “labor” at checkout on www.KAKIndustry.com.

KAK Labor Day Sale

Labor day sale starts now
www.kakindustry.com
Use code “labor”
Ends Monday the 5th at midnight
Not retroactive
One use per customer
Not for bulk orders or pricing

Over the past few years there has definitely been a huge shift towards AR-15 grips with a more vertical angle for a number of reasons including less wrist fatigue, better shooting posture, etc. Tactical Link, a company well known for very nice slings, sling mounts and other accessories, has just announced their newest product which they are calling the Tactical Link PDW Grip for AR style rifles. The TL PDW Grip looks pretty awesome and features its own distinct texture pattern. Check out the details and pics below. 

Tactical Link PDW AR Grip 1

The PDW Grip is a drop-in upgrade for AR style rifles with a more vertical angle, optimized for short LOP (length of pull) personal defense weapons (PDW), bringing the primary hand in closer to the shooter’s body, encouraging a more natural “elbows in” shooting posture which substantially reduces wrist fatigue and is concurrent with modern shooting doctrine.

Made to the finest standards from an extremely durable fiber-reinforced polymer, the PDW Grip is the result of extensive professional shooter feedback and engineering excellence that has produced one of the finest shooting upgrades in the market today. The PDW Grip sports a patent pending design with “zones” of moderately aggressive surface texture to provide unmatched gripping properties for positive weapon control in all environments.

Tactical Link PDW AR Grip 1

The PDW Grip is compatible with most lower receiver mounting platforms (forged or billet) and provides improved biomechanics to better align the trigger finger for a more comfortable and direct rearward trigger pull. Due to its hollow core design (no internal storage), the PDW Grip weighs only 2.1 oz and since the PDW Grip is a drop-in upgrade it is sold without a grip screw.

Shooter Refined Ergonomics: at 14 degrees, the PDW Grip is 235% (19 degrees) more vertical than the standard A2 grip and is the most comfortable and relaxing grip on the marketplace. Places the hand’s flexor muscles on more of the same plane creating a more natural hand position for a more natural hand position with little to no fatigue even during prolonged use.

Optimized Biomechanics: small beavertail backstrap provides enhanced ergonomics and allows the operator’s hand to ride high on the grip for improved recoil management and fire control.

Tactile Gripping Texture: much more aggressive texture than most other grips on the marketplace. “Zones” of more aggressive anti-slip texturing on the palm panels for excellent gripping properties and for positive weapon control in all environments.

Features:
–  All edges rounded for operator comfort
–  Reinforced beaver tail for extra rigidity
–  Aggressive PSP (Pentagonal Surface Projections) Texture on both palm panels for superior weapon control
–  Grooves on the front and rear backstraps for optimal anti-slip surface and excellent gripping properties
–  Accommodates the “seam” commonly found on the beaver tail of forged lower receivers
–  Unique trigger guard design provides a very comfortable, and absolutely the best fit at the trigger guard area of any grip on the market
–  Grip “pulls” the operator’s hand forward into the grip for a more positive grip and better operational control of the weapon
–  Robust design easily exceeds industry standards for quality, strength and durability
–  100% made in USA

The Tactical Link PDW Grip is available now directly from www.TacticalLink.com and will start shipping this week! I’ll definitely be snagging one of these soon to try out on an SBR or AR Pistol. 

BCI Defense just introduced a new addition to their growing line of AR’s, the BCID Pistol. Their new AR Pistol can be purchased as a 5.56 or 300BLK model. All BCID Pistol’s come with a 10.5″ Faxon Firearms barrel, 9″ BCID rail, high quality Azimuth Technologies BCG, ALG Defense QMS trigger, QD end plate and a KAK Shockwave buffer tube and Shockwave BLADE stabilizer to top it all off. Wether you are looking for an AR Pistol to turn into an SBR or just want to leave it that way, this would be a great place to start!

BCI Defenses’ Newest Firearm
BCI Defense is proud to offer their newest firearm to the marketplace, the BCID Pistol. Similar to our other firearms, BCI Defense is the proud manufacturer of the Upper/Lower Receivers, Charging Handle and the 9” Free Float Handguard. Offered in both 5.56 and 300BLK, this pistol has set itself apart from the rest with an MSRP starting at $965.00.

BCI Defense AR Pistol 1BCI Defense AR Pistol 1BCI Defense AR Pistol 1BCI Defense AR Pistol 1

BCID Pistol Specs:
–  10.5” Carbine Faxon Firearms Barrel w/1:8 Twist
–  A2 Flash Hider on 5.56 Model and the BCID Aurora on 300BLK
–  Mil Spec BCG by Azimuth Technologies
–  7075 T6 Forged Aluminum Lower Receiver and Upper Receiver w/Dry Lube
–  ALG Defense Mil Spec Trigger
–  KAK Shockwave Stabilizer and Buffer Tube
–  QD Endplate
–  30 Round Magpul Magazine

The BCI Defense Pistols are available to Dealers and Distributors across the country. Please contact them for more information, or visit www.BCIDefense.com. You can also send us an email at info@BCIDefense.com to become a dealer.

For you Pistol Caliber builders out there….I just saw that the new Quarter Circle 10 Pistol MUR uppers are back in-stock. A few of my buddies have these and they match up very nicely to the QC10 billet lowers. The part that makes these different from other uppers is that VLTOR made these specifically for QC10 with a slick side wall with no forward assist along with a taller ejection port to allow extra ejection clearance for rounds from 9mm up to .45 ACP. If you’re looking for a great upper to complete your Pistol Caliber build, this is a great option. Check them out at www.QuarterCircle10.com.

 QTRC10 Pistol MUR Upper 1

QTRC10 Pistol MUR Upper 1

QTRC10 Pistol MUR Upper 1

Photos by Triple Bravo and TracerX

The KAK Industry Memorial Day sale starts now. Save 15% site wide by using the code “thanks” at checkout. This sale is not retroactive, one use per customer and valid for in-stock items only. Get in on the deal at www.kakindustry.com.

KAK Industry Memorial Day SaleKAK Industry Shockwave Buffer Tube and 10.5″ Melonite Barrel shown.

**The sale expires monday at midnight. Does not apply to volume discounts, your order will be canceled and refunded.**

 

I’ve been working with Damage Industries for a long time now and have purchased parts for many of my builds through them. When they emailed me about a contest they have going I figured many of you might want to get in on this contest to win an awesome looking AR Pistol kit. The kit includes everything shown below, minus the lower receiver.  Check out the details below on you you can enter to win this Patriot AR Pistol kit.

patriot pistol kit

patriot pistol kit parts

Enter the contest @ http://damageindustriesllc.com/contest/

Full Description of Contest Prize:

Over $1000 in parts and accessories!

Damage Industries Complete Patriot Pistol Includes: (Damage Industries 100% made in USA products in bold)

Complete Upper (Assembled):
–  Short Barrel Projector/Dissipator Sleeve
–  Short Barrel Muzzle Brake, 4 Slot, 1/2 x 28
–  Faxon Short Barrel, 10.5″, 5.56x45mm, 1/8 twist, .750″ diameter, Carbine (100% Made in USA)
–  Crush Washer
–  Gas Block, 1913 Rail, .750″
–  Black Oxide Gas Tube, Carbine
–  Barrel Nut, Black Magnetite
–  Delta Slip Ring Kit
–  Strike Industries UDC Ultimate Dust Cover Flag Variant in black
–  Plate, Handguard Retaining, Round (.750″ barrels)
–  Barrel Nut
–  2-piece Handguard Replacement Quad Rail with American Flag Graphics
–  Upper Receiver, 1913 Railed, 7075 T6, jet black
–  Forward Assist Assembly
–  Charging Handle Assembly
– Complete Bolt Carrier Group, Semi (Mag Phosphate, Chrome): Bolt Carrier w/key: Manganese Phosphate and chrome plated to MIL-STD-171, machined to exact specifications from certified 8620 steel, Complete Bolt, 5.56, MPI marked, NiCoTef Cam Pin, Firing Pin, Mil-Spec Chrome Plating, Firing Pin Retaining Pin

Complete Lower Receiver Kit (does not include a receiver):
–  Receiver Extension Buffer Tube, Pistol w/QD socket 1.190” OD
–  Carbine Buffer
–  Enhanced Recoil Spring, Chrome Silicon, Black
–  Buffer Retainer Detent
–  Buffer Retainer Spring
–  Castle Nut, Black
–  End Plate, QD Enhanced
–  Arm Brace, AR-15 Pistol, SBX (Made in USA)
–  Hammer
–  Hammer Spring
–  Trigger
–  Trigger Spring
–  Disconnector
–  Disconnector Spring
–  Hammer/Trigger Pin x 2
–  Takedown Pin
–  Pivot Pin
–  Takedown/Pivot Pin Detent x 2
–  Takedown/Pivot Pin Spring x 2
–  Enhanced Trigger Guard, Black
–  A2 Pistol Grip, Black
–  Both a Stainless Slotted and a Black Hex Pistol Grip Screw
–  Pistol Grip Screw Washer
–  Fire Selector, Standard 90 degree
–  Selector Spring
–  Selector Detent
–  Magazine Catch
–  Magazine Catch Button
–  Magazine Catch Spring
–  Bolt Catch
–  Bolt Catch Pin
–  Bolt Catch Spring

Contest Eligibility, Rules, Terms and Conditions:

US Residents Only.

All Federal and State laws apply. Must be 21 or older. No payment or purchase necessary. Void where prohibited. Offer not eligible for cash or store credit. 

To enter, fill out and submit the contest form at http://damageindustriesllc.com/contest/, then confirm your entry via the automated email. Contest valid from 26 Apr 2016 until 9 May 2016 Midnight PST. Winner selection will be randomly drawn from participants who have filled out the entrance form completely and accurately. The winner must sign an affidavit of eligibility, liability, and publicity release.

Participants consent to allow Damage Industries LLC to collect the information participants submit via the contest form and use of the information, including consent to receive newsletters and emails regarding this contest and future promotions. Participants consent that Damage Industries shall not be liable for any damages that result from the mis-use of or the inability to use the materials and/or products in this contest. By submitting this form, participants agree to the contest rules, terms and conditions.

Most of you who know who FALKOR Defense is know them as the manufacturer of some amazing rifles and gun parts such as their Mirrored Ambi AR-15/AR-10 Receiver Sets, PETRA 300WM rifle, etc. FALKOR Defense has a plan to be know for much more. Behind the scenes, their “ShadowWorks” R&D team has been creating some awesome gun accessories as well and those accessories are now starting to become available for purchase.

Most recently they have started shipping their new “MANTIS” precision bipod. The MANTIS features adjustable swivel and cant and the legs can be moved forward or back independent of each other. To extend the legs you simply pull them out to the length you need and then to retract them you just push a button and they snap all the way back in.  

FALKOR Defense MANTIS Precision Bipod

FALKOR Defense MANTIS Bipod

They have also released their new “Velocity” Glock Mag Extensions that not only add capacity to your Glock Mags but give your mags a stronger base pad and the added weight can help ensure your mags drop free when empty. 

FALKOR Defense VELOCITY Mag Extension

Falkor Defense Velocity Mag Extension

Another product they have released is their MACH-15 (AR-15) and MACH-10 (AR-10) ambi charging handles. I have one of the MACH-15’s and they are extremely well built and function perfectly. 

FALKOR Defense MACH-15 Ambi Charging Handle

FALKOR Defense MACH-10 Ambi Charging Handle

FALKOR Defense MACH15

FALKOR defense MACH10

As you can see, lots of awesomeness coming out of FALKOR Defense right now and way more to come. You can check out all of the new products from FALKOR Defense at www.FALKORDefense.com.

If you’ve been paying attention at all to the AR industry you will know that two of the most popular ways to shorten the length of an AR are to either build an AR Pistol or use a PDW stock. MVB Industries, makers of one of the best PDW stocks out there, wanted to give the AR Pistol crowd some love too and has decided to create the MPK or Micro Pistol Kit. The MPK is a standalone version of the compact buffer system used in the ARC PDW Stock kit. It does not accept a stock making it perfectly legal to use on an AR Pistol. Just like its big brother, it allows you to use any mil spec BCG you want and also allows you to shotgun the upper unlike most other compact buffer systems.

MVB MPK Micro Pistol Kit 1a

MVB MPK Micro Pistol Kit 1a

For those who like a super compact AR Pistol without the desire to use any of the Pistol Stabilizing Braces/Blades, etc., this is a perfect piece to your puzzle. Comes standard with an H1 buffer but you can choose to upgrade to an H2, H3 or 9mm Buffer as well.

MVB MPK Micro Pistol Kit 1a

MVB MPK Micro Pistol Kit 1a

The MVB MPK is the shortest, most compact pistol buffer kit on the market and my friends at AVGUNS have the exclusive on it and a special Intro Price. Find more information and get in on this exclusive intro price at www.AVGUNS.com

KAK Industry is doing a one day President’s Day Sale. Save 15% off your entire order using the code “PRES15″ at checkout. KAK is known for their super competitive pricing and this is a great opportunity to save even more. Barrels, BCGs, Muzzle Devices, AR furiture, etc. The photo below shows my 6.25” 300BLK upper build entirely with parts from KAK Industry. 

www.KAKIndustry.com

KAK Industry Presidents Day Sale

Presidents day sale starts now. Not retroactive. One use per customer. Use code “PRES15”. Good for the entire site. One day only

Does not apply to bulk orders

Thordsen Customs, makers of the famous AR Pistol Cheek Rest Kit, is running a Black Friday Sale. Starting at 12:01am on Wednesday 11/25/15 and ending at 12am Monday 11/30, save 10% off all products on their website. No discount code needed. Check out their products and sexy looking new website at www.ThordsenCustoms.com.

Thordsen Customs Black Friday Sale

OUR BLACK FRIDAY SALE IS COMING!! ALL ITEMS STORE WIDE WILL BE 10% OFF. (ONLINE ONLY)

Sale starts at 12:01 AM on Thanksgiving Day and ends at 11:59 PM Monday 11/30.

STARTING IMMEDIATELY, ALL ORDERS INCLUDE A FREE TC REFRIGERATOR MAGNET UNTIL WE RUN OUT!!

————————————————————————————————————————————————————

Black Gun AR-15 Black Friday Sales

Thordsen Customs just introduced their new Picatinny Buffer Tube Adapter. This adapter will allow you to mount an AR Buffer Tube (pistol or carbine) to any gun with a vertical rear picatinny rail section. Guns such as the very popular Sig MPX typically come as a Pistol from the factory. The end user can now attach a buffer tube to use items such as the Thordsen Customs AR Pistol Cheek Rest Kit, Sig SB15 arm brace, Shockwave Stabilizer or if they have SBR’d the pistol they can easily add a collapsible AR-15 stock once the stamp comes back. If you’re looking for something like this, head on over to www.ThordsenCustoms.com and check them out.

Thordsen Customs Picatinny Buffer Tube Adapter 1

Thordsen Customs Picatinny Buffer Tube Adapter 1

Our new Picatinny Buffer Tube Adapter is a great addition to your Sig MPX, Sig P556XI, Rock River PDS, or any other pistol that utilizes a rear vertical picatinny rail. It gives a shooter the ability to add a cheekrest for greater stability or a stock for SBR conversions (federal tax stamp required).

The mounting method follows true STANAG (NATO Standard Agreement) protocol using the two back angles and the top of the rail as the contact points. The result is perfect alignment with the centerline of the firearm. A feature that is not attainable with typical side clamping adapters. Another bonus is that there are no visible fasteners or holes on the top and sides of the adapter for a clean sleek look.

FEATURES:

  • Compatible with multiple platforms
  • Fits any picatinny rail
  • True STANAG mount
  • Includes set screw for carbine buffer tubes
  • Engraved TC logo
  • 304 stainless steel hardware

SPECIFICATIONS:

  • 6061 T6 Aluminum
  • Type III Hard Anodize finish
  • Weight: 2.5 oz.
  • Width 1.37 inches, Height 1.4 inches

Made in USA

For a few years now, I have wanted to build a 9mm AR that takes Glock magazines. Mainly because the handgun I carry every day is a Glock 19. About a month ago I finally built my 9mm AR and it has been awesome. From the first round down the pipe it has run like a sewing machine with zero failures and the bolt hold open on last round is even working. Since then I have had a ton of questions asking me what specific parts I used in my build so I wanted to put all of the details together in on place for people to see and get information from. Once I have had a chance to put a ton more round through it I will follow up with a review as well.

QC10 9mm Build 0

My build started with Quarter Circle 10. They seem to be leading the pack in innovation regarding pistol caliber AR’s. They offer a Glock Small Frame lower for 9mm, 40SW, 357Sig, a Glock Large Frame lower for 45ACP and 10mm and a Colt 9mm lower as well as bolts and barrels for these as well. I wanted my AR to take the same mags as my Glock 19 so I went with the stripped Glock Small Frame 9mm Lower, 9mm BCG and 9mm 7.5″ barrel. Any AR-15 upper will do but I use a Rainier Arms mil spec forged upper minus forward assist. QC10 will be coming out with their own side charging upper with pistol caliber ejection port soon too. I also used an ALG Defense ACT trigger and need to upgrade to an ambi safety soon.

QC10 9mm Build 0

I covered the barrel with an SLR Rifleworks 8″ Solo Ultra Lite M-LOK rail. SLR rails are becoming one of my personal favorites. With such a short rail I decided to put an Arisaka Defense M-LOK Finger Stop underneath it. Its just small enough to not be in the way but big enough to keep your hand from getting too far forward. You may have noticed already but the QC10 barrels are straight blow back and do not require a Gas Tube or Gas Block.

QC10 9mm Build 2

QC10 9mm Build 2

For the muzzle device I chose the new 9mm Linear Comp from Kaw Valley Precision. I have used KVP’s Linear Comps for 300BLk and 5.56 before and the work great. Now they offer the same product in a 9mm version with a 1/2×28 thread pitch which is what I needed for the QC10 barrel. The fact that my barrel was shorter than my rail made the KVP linear comp a no brainer but it also looks sweet only sticking half way out the rail.

QC10 9mm Build 2

For my optic I chose a Vortex Optics RAZOR 3MOA red dot and mounted it to a Cross Machine Tool red dot sight mount. This is a nice light weight, compact optic setup that I feel has very fast target acquisition.

QC10 9mm Build 5

One item I recently installed was the Law Tactical Gen3 Folding Stock Adapter. At the moment I have this gun set up as an AR Pistol but will be converting it to a registered SBR with a stock soon. I love how compact the folding stock adapter makes this for transport. I can fit it in a small backpack, bag, case, etc without having to separate the upper and lower. It is quickly ready to shoot by flipping the buffer tube straight as you remove it from its concealment.

QC10 9mm Build 6

QC10 9mm Build 7

I was able to remove the extra weight at the rear of the carrier by removing the large roll pin and sliding it out. That is where the carrier extension for the Law Tactical Folding Stock Adapter goes.

QC10 9mm Build 7

The Law Tactical Gen3 Folding Stock Adapter has a lowered hinge to keep it away from your knuckles but just to be sure I am using a Fortis Manufacturing Hammer charging handle which has a really nice sized lever on it. The Hammer is one of my go to charging handles. Great build quality and affordable. 

QC10 9mm Build 7

Originally I started out with a standard carbine buffer spring and carbine buffer combo. It worked just fine but the guys at QC10 told me they recommend a heavier buffer, somewhere in the 5-6 ounce range to slow the carrier down a bit. I installed a Damage Industries 5.4 ounce H3 buffer and it continues to run perfect. 

QC10 9mm Build 7

Aside from a custom mag release and bolt catch assembly, the QC10 lower takes normal mil spec parts kits. You can see the Bolt Catch itself is mil spec but it is actuated by a pre-installed lever that contacts the magazine follower. This tends to be an issue with some mags as the spring pressure isn’t always strong enough to press the lever up and activate the bolt catch. This can be remedied by installing Wolf High Power springs inside the magazine. I bought a couple of SGM Tactical 33rd magazines from AIM Surplus and they seem to have better springs than the OEM ones. So far they are activating the LRBHO (last round bolt hold open) every time. 

QC10 9mm Build 7

So, there you have it. That’s pretty much my build in a nut shell. As I always tell people who are intimidated with building their own AR, “Its easier than you think”. You’ll love the increased range and accuracy you get out of a 9mm AR and being able to carry one type of mags to feed both your Primary and Secondary is awesome. Let me know if you guys have any questions or comments.

QC10 9mm Build 7