Category Archives: PWS – Primary Weapon Systems

Bootleg Builder Inc Banner 1

For immediate release – Boise, ID – Bootleg Incorporated is excited to announce the new additions to the 2018 product lists.

Bootleg Inc. started as a sister company to Primary Weapon Systems in 2015. Unlike the PWS long stroke piston design, Bootleg inc. focuses on the Direct Impingement (DI) systems and developing products that cater to the individual user. The main products over the pas years have been the introduction of PicMod™ technology and the Adjustable Suppressed Carrier.  This year we are excited to announce changes to our product line to allow more versatility.

NEW!! Bootleg Inc. PicLok™Handguard
Bootleg Inc. is now offering our Handguards in a new PicLok™ design. The rails come integrated with the MLOK accessory attachments, but at the front of the rail they will contain both picatinny and MLok. This allows the end user to use multiple accessory attachments and allows you to be able to continue using your favorite attachment methods. The PicLok™ design will be available in 7”, 9.2”, 13.4”, and 15” lengths, and will continue to be mounted with Bravo Companies KMR Mounting Hardware.

Bootleg PicLok Handguard

NEW!! Bootleg Inc. Full Auto Rated Adjustable Bolt Carrier Group
Bootleg Inc. has also made changes to one of its flagship products. The Adjustable Bolt Carrier is getting a huge upgrade! The Adjustable Bolt Carrier is now Full Auto Rated, and we will be shipping this as a complete carrier group. No need to worry about purchasing a bolt completion kit, because the new carrier will ship 100% ready to rock.  The carrier will also have forward assist serrations for use with compatible upper receivers.  The adjustable BCG will come with the standard 4 setting gas adjustment to tailor to your individual needs; so whether suppressed or unsuppressed this new upgraded carrier will fit perfectly into your collection.

Bootleg Adjustable Complete BCG

If you have any questions you can visit Bootleg Inc. at www.bootleginc.com, or contact bootleg by emailing customercare@bootleginc.com. If you would rather reach a person you can Call/Text 208-914-3300.

I heard this was coming but I had no idea how sick the new REBEL ARMS RBR-15 MOD 3 rifle was going to be. REBEL ARMS partnered with Primary Weapon Systems and their sister company, Bootleg Inc to introduced a beautiful, feature rich rifle. Not only is this one of the nicest looking factory rifles I’ve seen but it also brings an amazing amount of high end features at a very affordable price. Features such as MOA Guarantee, Lifetime Guarantee, Full Ambi Lower and Matching Bootleg Upper, Ratchet End Plate, Fluted Buffer Tube, MOE Furniture, PICMOD™ handguard, RAPTOR ambi charging handle and TALON ambi safety, Enhanced Carrier, RailScales and a Hard Case. Check out the details and pictures below.

Rebel Arms RBR-15 Mod3 Rifle 1

Rebel Arms RBR-15 Mod3 Rifle 2

“THE CLEAR ANSWER TO THE PERFECT AR-15 PLATFORM IS HERE, THIS TIME TO STAY, NOT REDESIGNED, NOT NEW TO THE MARKET, PLAIN AND SIMPLY BROUGHT TO YOU WITH NEW VALUE AND RESPECT. WE AT REBEL ARMS, PRIMARY WEAPON SYSTEMS AND BOOTLEG INC. HAVE WORKED HARD TO BRING YOU THE FINEST DI RIFLE SYSTEM IN THE WORLD, RENAMED, RETHOUGHT AND REDEFINED. AFTER MANY MONTHS OF DEVELOPMENT REBEL ARMS CORP IN COLLABORATION WITH PWS® INTRODUCES THE ALL NEW REBEL RBR-15 MOD 3 AND VARIANTS. THIS RIFLE IS FULLY AMBIDEXTROUS AND HAS MULTIPLE DIFFERENT PATENTED TECHNOLOGIES. REBEL ARMS IS VERY PROUD TO BE THE EXCLUSIVE SOURCE FOR THIS RIFLE, AND FOR THE FIRST TIME WE ARE OFFERING THIS GROUND BREAKING WEAPON IN MULTIPLE CONFIGURATIONS AND COLOR OPTIONS. CONTACT YOUR LOCAL DEALER FOR A CHANCE TO ORDER THIS RIFLE. DEALER SALES STARTED. EMAIL US SUPPORT@REBELARMS.com

Rebel Arms RBR-15 Mod3 Rifle 3

The new RBR-15 Mod 3 rifle goes on sale noon EST this Friday at an intro price of just $,1699 for anodized models on www.RebelArms.com. That’s not too long of a wait but if you need something now you can browse through these other AR rifles for sale today.

Have you heard of Bootleg Builder Inc? You may not know who they are but I know you’ve seen their parts!! Bootleg Builder is a sister company to Primary Weapons Systems offering DI (Direct Impingement) models of many PWS components such as upper receivers, handguards, low profile gas block, charging handle, adjustable BCG, etc. Right now they are having a SUMMER SALE! All you need to do is head on over to their website and use the discount code SUMMER to get $50 off your purchase of $369.99 or more! 

http://bootleginc.com/

Bootleg Builder Inc Summer Sale

Bootleg Inc. was formed last year as a sister company of Primary Weapons Systems (PWS). Their sole focus is on Direct Impingement (DI) accessories and AR builder education. Their goal is to provide quality products and information for anyone that would like to build an AR. You may not know the name but you’ve most likely seen their products as they were heavily covered during SHOT Show 2016 on the new Primary Weapons Systems “MOD2” and Agency Arms “Project Classified” rifles. Some of the new products that were made for those two rifles are now available for purchase separately through Bootleg Inc. Those product are the Bootleg PicMod rail, Bootleg Lightweight Adjustable Carrier (great for suppressor use) and the Bootleg Lightweight Upper Receiver. Take a few minutes to check out their new products below. 

PWS MK107 Bootleg Parts

Bootleg PicMod Handguards
Extruded from 6061 aluminum with mil spec hard anodizing, the Bootleg handguard is a great update to your build and comes in 9″, 13″, and 15″ configurations with the choice of adding the KMR mounting hardware.

Bootleg PicMod Handguard

–  Extruded 6061 Aluminum
–  Mil Spec Hard Anodizing
– BCM KMR Mounting System allows for easy installation for new builds or replacement of existing BCM KMR handguard.
–  Full Length Mil Spec Picatinny Top Rail
– Excusive integrated PicMod Technology allows most picatinny accessories to mount without adapters while preserving a seamless flat KeyMod mounting surface
–  Extended PicMod Feature on the bottom section for increased bipod mounting options
–  Lightweight skeletonized design

Bootleg Adjustable Carrier
The Bootleg Lightweight Adjustable Carrier is machined from S7 Tool Steel, and features a four setting vent system to relieve excess gas pressure from suppressor use.

Bootleg Adjustable Carrier

–  Machined from S7 Tool Steel
–  Lithium Isonite Coating
– 4 Setting Adjustable Vent System relieves excess gas pressure created from suppressor use creating longer dwell time and less blowback to the shooter.
–  Gas Adjustment can be turned while installed in the rifle
–  Unique Lightweight Design
–  Uses all standard mil spec components
–  Staked Mil Spec Gas Key
–  Adjustment Pin is easily removed for cleaning

Bootleg Lightweight Upper Receiver
The Bootleg upper receiver is machined from 7075 aluminum and mil spec hard anodized. It features a lightweight design and upgraded features to start your build off right.

Bootleg Lightweight Upper Receiver

–  Machined from forged 7075 Aluminum
–  Mil Spec Hard Anodizing
–  Forward assist eliminated for weight saving and reduced snag risk
–  Lightweight design 6.2 oz stripped (.8 oz lighter than a mil spec upper receiver)
–  1.7 oz lighter than a mil spec upper receiver with hardware installed
–  Captured dust cover door pin eliminating the need for the E clip
–  Increased barrel mounting circumference maintaining a solid barrel / receiver interface
–  Interference fit barrel extension interface for increased accuracy

At SHOT Show 2016, Agency Arms announced a partnership between themselves and PWS (Primary Weapon Systems) to offer the Agency Arms Project CLASSIFIED DI rifle. I got permission to share the following photos that as far as I know have not been fully published yet. Aaron Cowan of Sage Dynamics and Agency Arms said this regarding the new rifle…

“Everybody knows there’s ARs all over the place. Why would you choose one brand over another brand? Quality is quality. But there are features on the AR platform that can be improved and when people get together and start thinking about them they find new ways to do things that some people just didn’t think of before. Some times its a little fix, some times its something potentially revolutionary. Not gonna use the word game changer but what I will say is this rifle brings a lot of value added products to the platform that are gonna be something that you might prefer in a rifle system if you’re looking for a new one.” – Aaron Cowan, Sage Dynamics

Agency Arms Project Classified Rifle 1Agency Arms Project Classified Rifle 2Agency Arms Project Classified Rifle 3

Agency Arms Project Classified Rifle 4

Agency Arms Project Classified Rifle 6

– The upper and lower receiver appear to be billet but it is a lightened forged receiver set.
– 14.5″ 416 Stainless Lithium Isolated Barrel
– Chambered in .223 Wylde with a 1:8 Twist, Medium Weight Profile
– Midlength Gas System
– Ambidextrous controls with ambi mag release, bolt release, short throw ambi safety and charging handle
– CLASSIFIED 13.4″ Rail
– Rail up front features both picatinny and keymod.
– Has a ratcheting castle nut. Can be removed without tools.
– H2 Buffer
– Magpul stock, grip and MBUS PRO sights.
– Will ship with rail scales polymer rail covers
– Dead Air Pyro comp and Flash Hider suppressor mount. Mount is pinned for 16″ OAL.
– ALG Defense ACT Trigger.

The photo below shows a 4 position adjustable DI carrier that allows for suppressed / unsuppressed use or when running different ammunition loads. This rifle is one of the few DI platforms designed from the ground up for suppressed use.

Agency Arms Project Classified Rifle 5

Pre-orders are available and existing Agents have the ability to match their Agent number to their rifle serial number. 

Also included:
Grey Ghost rifle case
G-Code Scorpion Belt pouch
Two ETS clear magazines
RailScales Panels

MSRP $2900

www.agencyarms.com

Got a spare bolt laying around that’s lonely for a carrier or maybe you just want to upgrade the standard BCG in your rifle? PWS (Primary Weapons Systems) has some of their Enhanced QPQ DI AR-15 Bolt Carriers in-stock that are basically used/blems. They were installed in rifles and have some wear marks but have been inspected, new gas key installed and are good to go. PWS complete DI BCGs go for around $249 but you can get a PWS DI Bolt Carrier for just $75. That’s not a bad price at all for the quality you’re getting. Keep in mind, this is just the Bolt Carrier, you will still need an AR-15 bolt to complete it.

www.PrimaryWeapons.com

PWS di-carrier-cannon

PWS di-carrier-cannon

Over the years I have built a bunch of ARs. Some are not that special to me but others I have really grown to love and will be ones I will hand down to my kids as they grow up. Most of my rifles are pretty “Frankenstein’ish” So I wanted to start sharing a little bit about those special ARs. Nothing too in-depth. Just easy reading with some parts listed and a nice photo. 

One such rifle is one of the first ones I would probably think of when it comes to grabbing a rifle in a SHTF situation. My PWS / Seekins Precision hybrid which I’ve had for about 4 years now has morphed into a rifle I could never see myself getting rid of. 

AR15NEWS Seekins  AR15NEWS Seekins Precision PWS Primary Weapons Systems MK114larPrecision PWS Primary Weapons Systems MK114 largeClick To Enlarge

THE LOWER
The Seekins Precision SP223 billet lower receiver was the first part of this build that I owned. At first I wasn’t sure about the looks of the SP223 but it quickly grew on me and I had to have one. With the addition of a Wilson Combat TTU-3G trigger, Battle Arms BAD-CASS-SA-ST (Combat Ambi Safety Selector – Semi Auto – Short Throw) ambi safety, a Magpul MOE+ grip, Fortis QD End Plate and B5 Systems SOPMOD Bravo stock this lower feels complete.

THE UPPER
The upper I can not take as much credit for its awesomeness as I did not build it. It is a Primary Weapons Systems MK114 complete upper. The MK114 consists of a 14.5″ .223 Wylde QPQ barrel, pinned FSC556 comp, PWS Long-Stroke Piston System, PWS 13″ KeyMod rail, PWS Forged Upper and a BCM Gunfighter Charging Handle. 

I added to this upper a set of Magpul MBUS GenII backup sights, an Aimpoint PRO, RailScales KeyMod covers, a Zero Bravo Inc KeyMod RHS (Reversible Hand Stop) and a SureFire X300U with SR07 tape switch.

Why is this one of my favorites? Not only is it a pretty sexy looking rifle but it is an extremely reliable and solid rifle. I’ve put it up against some of my 18″ SPR type rifles and with exception of my .5″ group tack driver it shoots as good if not better than the rest. Its not a cheap setup by any means but it is definitely one I would grab in a heart beat and not have any reservation as to whether or not it could get the job done when called upon. 

This is probably one of the coolest things I have seen in a long time. Got a sweet little SBR or AR Pistol lower just laying around waiting for the right upper? THIS is what you’ve been waiting for! Weapon Outfitters just got in some of the Primary Weapon Systems 7″ Piston Driven Pistol Uppers that come with an awesome briefcase that has custom foam cutouts inside that will house the Upper, an Aimpoint, a Lower and two Mags. Its even available in both .223 Wylde and 762×39. This is so stinking cool and I want one BAD!! Check it out over at WeaponOutfitters.com.

PWS Briefcase AR Pistol 1 PWS Briefcase AR Pistol 1 PWS Briefcase AR Pistol 1

This bundle comes with your choice of PWS 7 inch upper in 2.23 Wylde or 7.62×39 and a Kenneth Cole Reaction “Changed the Lock” Briefcase that fits the upper and a pistol lower along with a couple magazines.*

*Pistol Lower and Magazines not included.

You could likely fit in your registered SBR lower but you might need to cut the foam a bit to fit. Also has a pre-cut segment you can remove that is the right size for an AImpoint T1.

http://www.weaponoutfitters.com/upper-receiver/complete-uppers/pws-7-inch-pistol-upper-and-briefcase.html#

I recently built a new sexy looking AR Pistol that I’ve been taking pictures of and have gotten quite a few questions about what components I used, why I set it up the way I did and how its running so far. Its been a while since I did a “Build Details” article so I figured since so many people were interested in this build I would do one on it. This article will basically be a run down of the different components as well as an explanation of why I used them if needed.

We’ve all seen some AR Pistols that have extremely short barrels/uppers. I tend to not go shorter than a 10.5″ barrel on mine as it’s short enough to make them more compact without sacrificing a ton of accuracy or velocity. This whole build started out with a mid length AERO Precision COP Upper and Forged Lower. This is the second AR I’ve built with this receiver set and I love them.

THE AR PISTOL UPPER
The Upper, as I mentioned, features an AERO Precision COP mid length upper with a Parallax Tactical TiN BCG, Magpul MBUS Pro sights and Fortis Mfg Hammer charging handle. For the optic I wanted something very small and compact so I went with the Vortex Optics RAZOR and an American Defense Mfg QD mount. The barrel is an ODIN Works 10.5″ .223 Wylde Stainless Steel barrel with a Primary Weapons CQB comp on the end. The combination of a shorter barrel and the CQB comp makes it perfect for a home defense weapon but the ODIN Works barrel definitely holds up to its reputation as a straight shooter and is absolutely capable of hitting longer range targets with ease. I’ll shoot some 100 yard groups soon and do another writeup for you guys on the accuracy of this 10.5″ AR Pistol.

AR Pistol Upper

THE AR PISTOL LOWER
The lower for this build is an AERO Precision lower that I bought as a set with the upper for this build. Both were Cerakoted Tungsten for a unique look. So far I’ve added a Battle Arms Development BAD-CASS-SA short throw selector and EPS Pins, Phase 5 Weapon Systems Winter Trigger Guard, Magpul K2 grip and an Impact Weapons Components QD End Plate sling mount. There is a new ALG Defense ACT trigger waiting for it down stairs that I need to install.

Another feature that should be standard on ALL AR Pistols is the combination of a Sig Sauer SB15 Arm Brace and an SB15 specific buffer tube such as the KAK Industry Super Sig Tube or Phase 5 Hex-2.  These buffer tubes push the SB15 further away from the receiver making the setup a bit more comfortable to shoulder (Shouldering the Sig SB15 is legal according to the ATF). For this build I installed the KAK Super Sig Tube and its awesome. You can even get an adjustment kit of rings that you slide on before installing the SB15 to adjust how far back it sits.

You also might notice the MagPod on the magazine. These will be available for purchase very soon!

AR Pistol Lower

THE BUSINESS END
The part I get questions about the most is the business end of the upper. Most people seem to really like this setup so here is a pretty detailed look at it. One of the other reasons I like muzzle devices like the CQB comp is that you can put a light right up to the end of the muzzle and not worry so much about it getting damaged in the blast of the rifle or coated in carbon. My setup consists of a Magpul AFG and a Haley Strategic Partners Thorntail Offset Mount with an INFORCE WML mounted on it. The Thorntail Offset Mount is made by Impact Weapons Components for HSP and is an awesome mount for the WML. It has four slots to mount the WML on and can even be mounted cantilevered like mine is.

IWC HSP Thorntail Offset Light Mount 1

As you can see the WML is pushed out almost to the tip of the muzzle. Pushing it further forward not only reduces shadowing in the light beam but also gives you a lot more real-estate to put your hand on a shorter rail. 

IWC HSP Thorntail Offset Light Mount 1

The next few pictures will show you a detailed look at the complete setup and hand position. While using the AFG I like to put my thumb on top of the rail for a solid grip. To activate the light, all you need to do is slide your thumb to the left and the activation button is right there. This is a very effective and comfortable setup.

IWC HSP Thorntail Offset Light Mount 1IWC HSP Thorntail Offset Light Mount 1IWC HSP Thorntail Offset Light Mount 1IWC HSP Thorntail Offset Light Mount 1

If you like this light setup and want to put it on your rifle or pistol build, I would recommend checking out www.ImpactWeaponsComponents.com. They have the HSP Thorntail Offset Mount, Magpul AFG grip and INFORCE WML light all in-stock. Plus, if you use the discount code “ar15news” at checkout you’ll save 5% off your entire order. 

This is definitely my favorite AR Pistol build to date. After a few hundred rounds so far I can tell you it runs like a champ and is absolutely a blast to shoot. The bolt holds open on empty mag, no Failure to Eject, no Failure to Feed, etc. Just an all around accurate AR Pistol that I would not hesitate to grab when my life depended on it. 

IWC HSP Thorntail Offset Light Mount 1 IWC HSP Thorntail Offset Light Mount 1

LINKS
AERO Precision
ALG Defense
American Defense Mfg
Battle Arms Development
Fortis Manufacturing
Impact Weapons Components
INFORCE

KAK Industry
Magpul
ODIN Works
Parallax Tactical
Phase 5 Weapon Systems
Primary Weapons Systems
Sig Sauer
Vortex Optics

Introducing the new Modern Musket line of range-ready DI AR-15 rifles from PWS!

Known for producing reliable and accurate piston driven AR-15 rifles and a DI accessory line designed to reliably enhance any AR platform, PWS’ next logical step was to supply their customers with the best DI AR-15 rifle available on the market.

For a limited time, all Modern Musket rifles are available with Lucid HD7 Red Dot optic ($249 value!) Continue reading “NEW!! Modern Musket DI AR-15 rifles from PWS!” »

Primary Weapons Systems has always been known for their amazingly reliable and accurate Piston AR’s. A little while ago they started taking their expertise in Piston AR’s and offering really nice, high quality DI parts and Accessories starting with rails and BCGs. Now they’re taking the next logical step and offering assembled uppers using their very high quality components. The heart of these new uppers are the awesome PWS Isonite 1:8 twist Barrels that are chambered in .223 Wylde. They are being offered in 3 different configurations. The DI-14 has a 14.5″ barrel and FSC556 muzzle device. The DI-14LE is the same as the DI-14 but with a TRIAD 556 muzzle device. The DI-16 has a 16″ barrel and FSC556 muzzle device. All 3 models will feature the PWS DI KeyMod rail and the PWS Upper Receiver with Forward Assist and Dust Cover. 

By now you’re probably bracing for sticker shock but you won’t need to. These awesome PWS DI Uppers are priced at just $699 which represents an amazing value. Check out the great video below or head on over to www.PrimaryWeapons.com to locate a local PWS dealer. I would also expect to see them in-stock soon at online dealers such as Weapon Outfitters.

620 PWS DI Stripped Upper 2

620 PWS DI Stripped Upper 1 copy

Many of you are already familiar with my buddy DMack of Ranger Proof. As the name of his company suggests, DMack is a hard use operator who spends his time beating on guns and accessories. If it passes the test they get the Ranger Proof stamp of approval and are deemed “Ranger Proof”. Through his experience he’s really learned how to spec a great running gun and has done a few limited edition “Ranger Proof” rifle runs in the past. The previous “Ranger Proof’ rifles however pale in comparison to the newest member of the Ranger Proof family. DMack partnered up with his friends over at Primary Weapons Systems to offer a PWS MK1 Mod1 Ranger Proof Edition piston driven rifle. Of all the Ranger Proof rifles…this is the one to have. It comes with a CMC Triggers 3.5LB Flat Trigger, 15” KeyMod rail and will be chambered in .223 Wylde. Take a look at the specs and pictures below, then head on over to www.PrimaryWeapons.com to order yourself 1 of 50 PWS Ranger Proof rifles.

PWS Ranger Proof 1

PWS Ranger Proof 1

PWS Ranger Proof 1

PWS Ranger Proof 1

This Special Edition MK116 Rifle features a 15″ handguard, Rainier Arms Raptor Charging Handle, CMC Trigger and a Magpul STR stock.  Only 50 of these rifles will be made.

Utilizing the proven system originally designed for the MK107, the MK116 uses a carbine length gas piston system. The operating system, designed after the venerable AK-47, features a long stroke fixed operating rod design with an adjustable gas block, 15 inch free floated handguard.

The handguard features the VLTOR KeyMod System which comes standard with two 2 sections of 1913 rail as well as a continuous 1913 top rail.

Specifications

CALIBER

.223 Wylde

WEIGHT

6 lbs, 14 oz

OVERALL LENGTH

33 (83.8 cm)

BARREL LENGTH

16 (40.6 cm)

MUZZLE VELOCITY

2993 ft/sec (M855)

MUZZLE ENERGY

1233 ft/lbs

FEATURES
–  PWS Forged Mil-Spec Upper and Lower Receiver
–  PWS Isonite Treated 1:8 Twist Barrel
–  PWS Enhanced Bolt Carrier Group
–  PWS 15″ KeyMod Rail System
–  Rainier Arms  RAPTOR Charging Handle
–  CMC 3.5lb Flat Bow Trigger
–  Magpul STR Stock and MOE Grip
–  Magpul MBUS Gen 2 Sights
–  Magpul MOE Trigger Guard
–  Magpul 30 round PMAG
–  Ranger Proof Logo

Weapon Outfitters is having one of the best money saving 4th of July Sales that I’ve seen this year. They are offering 15% off all Complete Uppers and Custom Upper Builds on their website. This includes uppers from from some awesome companies such as AAC (Advanced Armament Corp), Centurion Arms, Daniel Defense, KAC (Knights Armament Company), LWRC, PWS (Primary Weapon Systems) and TROY. 15% off is probably the most generous discount you’ll see for a while on uppers of this quality. Use the code “4THOFJULY” at checkout, now through Monday the 8th to save 15% off your order. Head on over and check these out at WeaponOutfitters.com.

Weapon Outfitters Custom AR15 Upper Build 4th July 2013 1 620 Weapon Outfitters Custom AR15 Upper Build 4th July 2013 1 620 Weapon Outfitters Custom AR15 Upper Build 4th July 2013 1 620 Weapon Outfitters Custom AR15 Upper Build 4th July 2013 1 620

A majority of AR-15 owners spend a lot of time searching for super deals that allow them to finish off their latest AR build in the $800-1,000 range.  There is also a growing segment of AR-15 owners who want only the highest quality components and will pay whatever it takes to make sure they have a weapon that will perform under just about any condition you can throw at it.  I can be accused of both so I’m not saying one is better than the other.  Believe me, I’ve owned some crap in the past.  These high end components can also be hard to find as they are made in smaller quantities.  If you simply enjoy owning high end firearms or need one for your super cool day job, Weapon Outfitters has been stocking up on some super high end piston AR uppers and wants to let you have first dibs.  Check out the pics and details below and click the link to purchase.  You can also use the code “AR15NEWS” at checkout to save $50 but it only works on these uppers.  Enjoy your gun porn of the day.  🙂

Weapon Outfitters Uppers 620

Weapon Outfitters Uppers 1 620

TOP TO BOTTOM

PWS MK116 Complete Upper with FSC-556 Muzzle Brake  –  $1,299.95

LWRC M6A2, 5.56mm 16″, SPR  –  $1,919.50

LWRC M6A2 SPR, 5.56mm 14.7″ with pinned/welded flash hider  –  $1,919.50