Maxim Defense is now manufacturing suppressors. Beginning with one for a belt-fed, then the DSX-D (Duty Suppressor System – Direct Thread) suppressor, plus the DRF-22 (Direct Thread Rimfire) suppressor, with more to come. 

And none other than Phil Dater is helping them do it. 

Maxim Quiet

Maxim Defense Suppressor Development

After S&W acquired Gemtech Suppressors and moved the company cross country, Maxim Defense was privileged to hire many of the talented people who remained behind. One of those people was Phil Dater. You might remember his name from the founding of Gemtech and the excellent work done by Antares Technologies in the modern small arms and suppressor industry. 

Michael Windfield, founder and owner of Maxim Defense, launched the development of Maxim’s suppressors with the directive, “We do the hard stuff first.” Hard stuff in this context refers to successfully suppressing an FN MAG belt-fed machine gun, which they did.

Maxim Defense

Having checked that box, they began developing a full line of suppressors. Those devices are now dropping sound levels well below the OSHA hearing safe threshold of 140dB. For example, the average measurements taken per MILSTD-1474D while testing the DSX-D suppressor were 134dB on a 10.3″ AR-15 chambered in 5.56 and 114dB with the DRF-22 rimfire suppressor. These sound levels were measured at the shooter’s ear.

Maxim Defense DSX-D Suppressor

The DSX-D (Duty Suppressor System – Direct Thread) suppressor is specifically designed to minimize a suppressed weapon system’s violent cyclic rate and gas blowback.

DSX-D Maxim Defense

The suppressor consists of a three-piece MonoKore design that adds 7.25″ to the muzzle of your rifle. The DSX-D is rated for full auto in all available calibers; 5.56mm, 7.62mm, and 6.5 Creedmoor.

There is, however, an 8.5″ barrel restriction. Additionally, the suppressor can be pinned to a 10.3″ barrel to give you a 16″ overall barrel length essentially.

DSX-D

DSX-D Suppressor Features

  • State of the art MonoKore Design
  • Simple three-piece design
  • Constructed of military-grade materials (Grade-5 Titanium and 17-4 Stainless Steel)
  • Drops the sound level below the OSHA hearing safe threshold of 140dB
  • Purposely built for each available caliber (5.56, 7.62, 6.5 Creedmoor)
  • The suppressor core has integrated carbon cutters for easy tube cleaning
  • Full auto rated in all available calibers
  • Ships with direct thread mount (1/2×28 for 5.56 or 5/8×24 for 7.62 and 6.5 Creedmoor)
  • Disassembles with standard tools for end-user serviceability 

DSX-D

DSX-D Suppressor Technical Specs

  • Diameter: 1.75″ outer diameter
  • Material Composition: Grade-5 Titanium and 17-4 Stainless Steel
  • Weight: 21 ounces
  • Overall Length: 7.9″
  • Finish: Cerakote and DLC (Diamond-Like Coating)

DSX-D Suppressor Testing Protocol

The Duty Suppressor System is built for the world’s most rigorous demands; this suppressor is designed to be the most robust and strongest suppressor in its category.

It has been repeatedly tested with SOCOM tables across various calibers and barrel lengths, down to 8.5″ 5.56 NATO with M855 ball ammunition. It has survived with no damage or significant change in sound reduction.

Maxim Defense

SOCOM Firing Table test is conducted using eight fully loaded 30-round magazines, fired sequentially at different rates, from 1 round per second to a full auto mag dump.

Magazine #1 – 1 round per second
Magazine #2 – 2 rounds per second
Magazine #3 – 1 round per second
Magazine #4 – 3 to 5 round burst
Magazine #5 – 1 round per second
Magazine #6 – 2 rounds per second
Magazine #7 – 1 round per second
Magazine #8 – full auto mag dump

Maxim Defense DFR-22 Rimfire Suppressor

The DRF-22 (Direct Thread Rimfire) Suppressor is specifically designed to minimize the increase in cyclic rate and gas blowback of a suppressed rimfire firearm. Design features include the significant reduction of sound signature, decreasing flash signature, reduction of recoil, and an increase in overall accuracy.

DRF-22

DRF-22 Rimfire Suppressor Features

  • State of the art MonoKore Design
  • Simple three-piece design
  • Constructed of military-grade materials
  • No detectable first round pop
  • Designed explicitly for .22LR pistols and rifles chambered in .22LR, .22MAG, and.17HMR
  • Disassembles with standard tools for end-user serviceability

DRF-22

DRF-22 Rimfire Suppressor Technical Specs

  • Diameter: 1.0″ outer diameter
  • Material Composition: 7075-T6 Aluminum and 6AI-4V Titanium
  • Weight: 3.5 ounces
  • Overall Length: 5.9″
  • Finish: Type III MIL-SPEC hard coat anodizing and DLC

DRF-22

Find the entire Maxim Defense suppressor lineup here online.